| On Stand | Yes |
|---|
| Product Use | Concrete Cutting |
|---|
MDU3H-30AF - Core Drill with Auto Feed
Part# MDU3H-30AF
Quick Links:
The Pentruder MDU3 is a versatile and powerful drilling system with a possibility to change the Drop gears in order to change the model to either MDU3-30, MDU3-60 or MDU3-100. This gives the system a very smooth and efficient run and offers a wide speed range for different sizes of drill bits.
With the quick disconnect couplings you will reduce the set up time, and if the drill bit would get stuck you can easily disconnect it and reverse the machine.
With the newly developed Autofeed small and big drill bits can be drilled in a shorter time than anyone thought possible, and when you have reached the desired depth you can choose in the setting if you want the machine to just stop, or if you want it to back up to the starting position on the track.
Pentruder MDU3 Core drill is used together with the same TS-tracks as for the Pentruder Wall saws for max stability.
Performance & Control
* Motor RPM ratio: 1:4
Integrated drive and control electronics eliminate the need for a separate power pack. Simply connect directly to a 380–480 V, 50/60 Hz, three‑phase supply for fast setup and efficient operation.
Built‑In Display
The integrated display provides real-time operating data, including:
* Current (Amp)
* Voltage
* Power
* RPM
* Angle …and more, giving the operator full control and visibility at all times.
Max output power: 11hp
Number of speeds: 15 including neutral and reverse
Spindle speed range: 200 - 1800 rpm
Max torque: 60 Nm
Drop Gear Ratio: 24:12
Power Supply: No separate powerpack needed, connect directly to 380-480V 50/60 Hz 3-phase supply
Compatible quick change drill bit couplings:
- DR-1-1/4"
- DR-CR1-28
- DR-1/2" BSPP
- DR-A-ROD
- DRF-84
- DRF-94
- DRF-100
Compatible Drill Bit Extensions:
- DED-250
- DED-500
With the quick disconnect couplings you will reduce the set up time, and if the drill bit would get stuck you can easily disconnect it and reverse the machine.
With the newly developed Autofeed small and big drill bits can be drilled in a shorter time than anyone thought possible, and when you have reached the desired depth you can choose in the setting if you want the machine to just stop, or if you want it to back up to the starting position on the track.
Pentruder MDU3 Core drill is used together with the same TS-tracks as for the Pentruder Wall saws for max stability.
Performance & Control
* Motor RPM ratio: 1:4
Integrated drive and control electronics eliminate the need for a separate power pack. Simply connect directly to a 380–480 V, 50/60 Hz, three‑phase supply for fast setup and efficient operation.
Built‑In Display
The integrated display provides real-time operating data, including:
* Current (Amp)
* Voltage
* Power
* RPM
* Angle …and more, giving the operator full control and visibility at all times.
Max output power: 11hp
Number of speeds: 15 including neutral and reverse
Spindle speed range: 200 - 1800 rpm
Max torque: 60 Nm
Drop Gear Ratio: 24:12
Power Supply: No separate powerpack needed, connect directly to 380-480V 50/60 Hz 3-phase supply
Compatible quick change drill bit couplings:
- DR-1-1/4"
- DR-CR1-28
- DR-1/2" BSPP
- DR-A-ROD
- DRF-84
- DRF-94
- DRF-100
Compatible Drill Bit Extensions:
- DED-250
- DED-500