Skip to content Skip to navigation menu
Loading...

695XL-16 PG-XL Gas Saw Package

Part# 575827

$3,766.00

Added to Your Shopping Cart

695XL-16 PG Gas Saw Package with 16 inch/40 cm FORCE4 guidebar & PowerGritXL chain. Also compatible with the full line of FORCE4 concrete diamond chains.

The 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder.

Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction, utility contractors, and concrete professionals.

Product Details

  • Use on concrete, stone, masonry, brick, block, ductile iron, cast iron, PVC, HDPE and more
  • Most versatile gas power cutter
  • Piston and cylinder lowers engine temperature
  • Longer life muffler with reinforced internal baffle
  • Easy-to-start with higher energy ignition system
  • Easy-to-tune carburetor
  • Will also operate FORCE4 diamond chains
  • WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Specifications, Details & Support

Gas Concrete Saw
Engine Type 2-stroke, single cylinder, air cooled
Displacement 5.7 cu in (94 cc)
Engine Speed Max 9,300 +/- 150 rpm (max)
Engine Speed Idle 2,700 +/- 100 rpm
Fuel Mix Ratio 50:1 (2%) fuel-to-oil
Fuel Capacity 0.26 gal (1 L)
Chainsaw
Power Type Gas
Use Application HDPE
Ductile Iron
Cast Iron
PVC
AC Pipe
Weight, Saw Only 21 lbs (9.6 kg)
Cutting Depth up to 16 in (40 cm)
Bar Length 16 in (40 cm)
Noise Level (Power) 115 dB(A), (Kwa = 1.0 dB(A))
Chain Length 16 in (40 cm)
Noise Level (Pressure) 104 dB(A), (K=1.0 dB(A))
Horsepower 6.4 hp (4.8 kW)
Front Handle Vibration, ahv eq Concrete Cutting 3.6 m/s2 (K=0.2 m/s2)
Rear Handle Vibration, ahv eq Concrete Cutting 3.1 m/s2 (K=0.2 m/s2)
Front Handle Vibration, ahv eq Pipe Cutting 5.62 m/s2 (K=0.2 m/s2)
Rear Handle Vibration, ahv eq Pipe Cutting 5.28 m/s2 (K=0.2 m/s2)
Water Supply (Min) 20 psi (1.4 bar)
Water Flow Req (Min) 2 gpm (8 lpm)
General
Unit of Measure Each

Related Products

695XL-F4 Drive Sprocket

695XL-F4 Drive Sprocket

Fits the 695XL FORCE4 guidebars and diamond chains
695XL Air Filter

695XL Air Filter

Engine Oil, 2-Stroke 2.6 oz / 100mL (6-Pack)

Engine Oil, 2-Stroke 2.6 oz / 100mL (6-Pack)

An oil formula that is cleaner burning, and provides better thermal protection 50:1 mix
Back To Top