This product is available through our Pro User and Dealer Network.
The new electric 536-E power cutter from ICS gives you the freedom to cut indoors or out with no fumes. Operates on 220V and is compatible with most generators.
Available for the 10-inch (25 cm), 12-inch (30 cm), or 14-inch (35cm) FORCE3 guidebars and diamond chains. With the quick switch of a drive sprocket and guidebar it will also operate the 12-inch FORCE4 and PowerGrit series diamond chains.
All the cutting capabilities you have come to expect from an ICS power cutter - square corners, no over cuts, deep cutting, with a 4.8hp motor to power your team through concrete, stone, masonry, ductile iron and more.
Input Voltage: 220 - 240 VAC Single Phase, 60Hz
Rated Current: 16 A
Recommended Min Generator: 5 kVA
No load speed 8500 rpm
Recommended extension cord sizes:
0 - 50ft / 0 - 15m | 12AWG / 4mm2
50 - 100 ft / 15- 30m | 10 AWG / 6 mm2
100 - 200 ft / 30 - 60m | 8 AWG / 10 mm2